HumpMod.com

Make use of that empty space - the easy way

See our Lifetime Guarantee further below 

Questions, and customer service: e-mail us.

 

 

 

Every Suzuki GSX1300R Hayabusa comes with a hump which can be installed in place

of the passenger seat for aerodynamic purposes. The hump is empty inside. 

It would be nice to utilize this empty space in order to be able to carry small items such as spare gloves, 

cameras, portable air compressor like Cycle Pump, zip ties, a bottle of water, etc.

Every rider should carry First Aid kit, but most riders have no place to put it.

The problem is that the bottom of the hump comes from the factory screwed to the hump with four bolts. 

It would be very impractical to unscrew the bolts every time a rider needs access to the hump.

That's where Hump Mod comes really handy. Stock fasteners are replaced with quarter turn fasteners,

and voila! A rider is able to remove and install back the bottom of the hump in seconds.

As a result, a rider gains as much extra space as the under seat area,

effectively doubling the precious cubic inches of space.

For the first generation Hayabusa (1999-2007), only fasteners need to be replaced.

Due to a different hump design for the second generation Hayabusa (2008-2014), 

different size fasteners have to be used. Additionally, Suzuki did a poor job redesigning the bottom of the hump.

Namely, Suzuki made an opening in the bottom of the hump to allow riders to squeeze in the hump soft items

such as gloves. While this would work for gloves, it would not work for other small items which

would simply fall out of the hump. Our kit for the second generation Hayabusa includes a small cover

so that the opening in the hump cover could be sealed. This would prevent any objects from falling out.

Our Deluxe Kit includes another important feature. It contains a rubberized sticky tape which is used

to cover the inside of the hump. This prevents bouncing of objects inside the hump while you ride.

This is especially important when you carry in your hump expensive electronics such as music players,

photo cameras, video cameras, flash drives,  cell phones, and other mobile devices.

Hayabusa Hump is a perfect place to conceal small items, while at the same time having an easy access.

For example, money, medication, small tools, documents, cell phone cables, etc.

 

Faster through every turn

Click on the image if you have an open mind.

Featured in Sport Rider magazine (July 2006 issue, page 27)

 

 

Here’s a testimonial from Sam. He made this video minutes after installing our kit!

Many thanks to Sam from HumpMod.com team for his valuable feedback!

Turn an empty space inside your Hayabusa hump into a valuable storage space 

right on your bike by doing the Hump Mod (Hump Modification). 

One moment - it's closed. And within 3 seconds - it's opened. 

This cost effective and quality solution won't drain your wallet, but will serve you for years to come. 

Made to exact specifications. Watch the presentation above for a minute, and see how much stuff fits in the hump. 

Well, not quite as much as this girl is trying to put in (even she is laughing at times). But you get the idea.

Some people mistakenly think that the fasteners can be lost when the hump is opened - this is not the case. 

Our design includes retainers which hold all the fasteners in place. 

You can shake it, or drop it - no fasteners get lost. They always stay in place.

 

Ready to make a purchase?

 

Pictures below show closed and opened hump. 

As you can see, the cycle pump, the tire repair kit, and a bunch of zip ties 

all nicely fit inside the Hayabusa hump, with a bit more space to spare for smaller items 

(Deluxe Kit for '99 - '07 model shown). 

Note, that '08 and above model kits come with a plate to cover the hole in the hump bottom.

 

 

Here are a few quotes from those who ordered the kit:

 

    www.SuzukiHayabusa.org,

        User 1300R: "Try this. This is great!"

        User fstbusa: "I got one of those and it works flawlessly..."

 

     www.Hayabusa.org,

        User fstbusa: "I have already spent $20 trying to get some of the right 

sized parts that will work [doing it myself -Ed. IG]. 

Could never get anything right.... already ordered one [of these kits - Ed. IG]..."

       User sageronin: "I also purchased a similar (but not exact) solution off of eBay 

a few months ago, however I like "I.G.'s" a lot better, which is why I ordered his."

 

      www.ozbusa.com (Australia)

        User BEAR: "Bought the kit from the States. Arrived within a week, 

took a few minutes to fit the parts (rubber strips not done yet) 

and ......it fitted and worked perfectly."


Hayabusa ('99 - '07)

 

 Basic Hump Mod Kit - US$17.99      Customers from US only        

  Customers from other countries    

The Basic Hump Mod Kit contains everything you need to start using the empty space inside your Hayabusa's hump - all necessary fasteners which replace your stock bolts and nuts holding the hump together.

 

Deluxe Hump Mod Kit - US$23.99   Customers from US only    

  Customers from other countries    

Deluxe kit includes everything the Basic Kit has, plus shock absorbing and anti slip foam for the inside of the hump to prevent hard object like cameras, for example, from moving around and hitting the inside plastic of the hump, and causing damage. It is also very annoying when you ride, and feeling the contents of the hump moving around.  The self adhesive foam is specifically designed to prevent slippage, to provide necessary level of absorbtion, to withstand heat and cold. It is also water resistant. However, it is not too thick, and will not take away any valuable space.

 

Hayabusa ('08 and up)

 

Basic Hump Mod Kit - US$20.99     Customers from US only 

     Customers from other countries 

The Basic Hump Mod Kit contains everything you need to start using the empty space inside your Hayabusa's hump - all necessary fasteners which replace your stock bolts and nuts holding the hump together. It also includes a custom plate to cover the hole in the bottom of the hump.

      

   Deluxe Hump Mod Kit - US$27.99   Customers from US only  

      Customers from other countries only  

Deluxe kit includes everything the Basic Kit has, plus shock absorbing and anti slip foam for the inside of the hump to prevent hard object like cameras, for example, from moving around and hitting the inside plastic of the hump, and causing damage. It is also very annoying when you ride, and feeling the contents of the hump moving around.  The self adhesive foam is specifically designed to prevent slippage, to provide necessary level of absorbtion, to withstand heat and cold. It is also water resistant. However, it is not too thick, and will not take away any valuable space.

 

* Orders usually ship the same day, or the next day with the exception of a weekend (Friday night through Sunday night). We always send confirmation e-mail when we ship the order.

** Shipping charges include shipping insurance. If you don't receive your order within a reasonable time (two weeks for USA and Canada, three weeks for other countries), please let us know your name, when you ordered, and what kit - and we will ship you another order completely free of charge - no questions asked. Note that orders usually arrive much sooner than the maximum waiting time mentioned above.

Our Lifetime Guarantee

We are confident that you will like our product. However, if for any reason you are not completely satisfied with it's performance, please return it within 30 days for a full refund including shipping. That's right. You will get back the full amount you paid!

But, that's not it. For years to come, if at any time any part of this product breaks (even if it's your fault), we will replace it free of charge. Just let us know your name, address, when you ordered, and what you need, and we will ship it to you free of charge!

With such a Guarantee, you have nothing to lose. Order now. Order for your friends as well. Make use of that empty space inside your hump.

The installation is completely reversible if you ever want to go back to stock form. As a matter of fact, we put all stock parts in the small plastic bag, and keep it right there in the hump just in case we ever decide to remove the kit).

*** In rare cases, there is a very small chance that one of the locking screws at the rear may touch the plastic when you put the hump back on the bike. If this is the case, please let us know immediately, and we will send you a pair of custom made low profile locking screws free of charge.. Only one customer with '05 model Hayabusa complained about this being a problem.

 

Your feedback is greatly appreciated. We ride bikes as you do.

Whatever questions, or concerns you might have, please feel free to send us an e-mail.